Training
- Home
- Training

Allen Bradley Contrologix5000 PLC
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
 TCS-PL0605
This course is for individuals who can quickly learn and apply Logix5000TM concepts, terminology, hardware troubleshooting skills, and interpretation of ladder logic in a studio 5000 Logix Designer® project.
Learn More
Bently Nevada 3500 Vibration Monitoring Operation & Maintenace
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
  TCS-VI0201
The 5-day EIC accredited hands-on operations and Maintenance training course is designed for plant personnel involved in the daily operation and maintenance of Bently Nevada Model 3500 and System 1 (Condition Monitoring).
Learn More
Compressor Control And Protection
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
 TCS-CP0101
This course gives a practical introduction to centrifugal gas compressors, their performance characteristics and their operation within a process plant.
Learn More
Gas Turbine LM2500 Engine Familiarization
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
  TCS-AE0401
Basic Gas turbine theory and operation and the knowledge required to ensure consistent, trouble-free performance from the engine and its associated equipment.
Learn More
Gas Turbine LM2500 Mechanical Maintenance Training
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
 TCS-AE0403
This customer tailored 5-Day training course covers all aspects of the GE LM2500 gas turbine maintenance with the focus on maintenance procedures required to put the unit back to operational condition.
Learn More
GE Speedtronic Mark V Gas Turbine Controls
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
 TCS-CT0101
The 5-day operations and Maintenance course is designed for plant personnel involved in the daily operation and maintenance of either Mark V control systems, Mark VI or Mark Vie and HMI.
Learn More
Ge Speedtronic Mark VI Gas Turbine Controls
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
 TCS-CT0102
The 5-day operations and Maintenance course is designed for plant personnel involved in the daily operation and maintenance of either Mark V control systems, Mark VI or Mark Vie and HMI.
Learn More
GE Speedtronic Mark VIe Gas Turbine Controls
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
 TCS-CT0103
The 5-day operations and Maintenance course is designed for plant personnel involved in the daily operation and maintenance of either Mark V control systems, Mark VI or Mark Vie and HMI.
Learn More
LM2500 GT Control System Micronet+
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
 TCS-AE0402
This course introduces plant maintenance personnel to the Woodward MicroNetâ„¢ and MicroNet Plusâ„¢ turbine control systems.
Learn More
Plant DCS Fundamentals
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
 TCS-DC0101
In this course participants will learn about the main characteristics of the DCS systems.
Learn More
Pump Selection, Installation Performance And Control
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
 TCS-PM0101
This programme provides a comprehensive understanding of the various types of reciprocating, rotary, and centrifugal pumps.
Learn More
Pumps & Compressors Predictive Maintenance & Toubleshooting
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
 TCS-PC0101
It is known fact that Pumps and Compressors are critical machines and because of this it is most important that the appropriate maintenance is applied, which is of course more efficient than preventive maintenance which is time based.
Learn More
Siemens Simatic PCS7 Control System
PDH: 35 Hours | CEUs: 3.5 Credits
  5 DAYS
  TCS-PL0603
This EIC accredited PCS7 Control System Training course is designed to teach students how to implement the diversity of engineering possibilities with SIMATIC PCS 7 process control system.
Learn More